Nordson Asymtek MH912L Dual lane Loader
Voor meer informatie omtrent voorraad en prijzen klik hier
Nordson Asymtek MH912L
Bouwjaar 2011
Features
As part of the MH-900 series the MH-912L can be configured for inline or Same-side Loading operation, and supports both single or dual lane conveyors.
Loader controls can be intergrated with the Spectrum S-900N and Spectrum II S2-900 Series dispensers or operate independentely with other SMEMA equipment.
The loader easily manages a wide range of parts, from extremely thin frames or strips to large heavy boats or pallets.
Capacity is flexible; the system can handle multiple magazines for reduced loading frequency. PLC control enables future expandability when the process needs change.
Nordson Asymtek MH-912L Specificaties
| Magazine width | Min: 15 mm (0.59 in.) |
| Max: 172 mm (6.8 in. | |
| Magazine Length | Min: 50.8 mm (2.0 in.) |
| Max: 317.5 mm (12.5 in.) | |
| Magazine Height | Min: 101.6 mm (4.0 in.) |
| Max: 279.4 mm (11.0 in.) | |
| parts per magazine | 1 to 99 |
| Part length | Min: 50.8 mm (2.0 in.) |
| Max: 317.5 mm (12.5 in.) | |
| Part Width | Min: 15 mm (0.59 in.) |
| Max: 160 mm (6.3 in.) | |
| Part thickness | Min: 100 µm (0.004 in.) |
| Max: 18 mm (0.71 in.) | |
| Min frame pitch within magazine | 2.54 mm (0.10 in.) |
| Overboard clearance | 25 mm @ 3 mm (0.98 @ 0.12 in.) from edge of part |
| Underboard clearance | 25 mm @ 6.5 mm (0.98 @ 0.26 in.) from edge of part |
| Edge clearance required | 3 mm (0.12 in.) |
| Max. magazine weight: | 6.8 kg (15 lb) |
| Max. carrier weight: | 0.9 kg (2 lb) |
| Max. elevator payload: | 40 kg (88 lb) |
| Facility requirements | |
| Dimensions (Width x Depth) | 625 mm wide x 1250 mm deep (24.6 x 49.2 in.) |
| Voltage | 110-240 VAC, 50/60 Hz |
| Amperage | 1.0A nominal, 1.5A peak @ 120 VAC |
| Air supply | 552 kPa (80 psi), 1 SCFM @ 80 psi |
| Weight | 230 kg (507 lbs) |
Voor meer informatie, neem contact met ons op.
| Specificatie | Omschrijving |
|---|---|
| Disclaimer | 0 |
