Dima Solano RO-510 Reflow oven
Voor meer informatie omtrent voorraad en prijzen, klik hier.
Dima solano RO-510 Reflow oven in zeer goede conditie.
Bouwjaar 2006
Features:
4 independent controlled heating zones.
Internal cooling zone.
Integrated ionizer for ESD safe soldering.
DIMAsoft reflow profiler software available.
Flux traps to minimize contamination of system
Easy to service one way approach heating units.
SMEMA interface.
Microprocessor controlled.
Lead free approved.
Built-in reflow tracker in standard software
standard 100 programs and 5 profiles can be stored.
Optional oven manager software.
Specificaties:
Dimension (L x W x H) : 2750 x 105 x 1420 mm
Conveyor: 500mm wide stainless steel mesh belt and pin conveyor with 5mm pins (3 mm optional)
Product dimension:Mesh: 430MM width, Max 50mm height (incl. components)
Pin conveyor: 25-450mm width, max 25mm height (incl. Components)
Transport speed: 0.05 – 0.8 m/min
Controller: Microprocessor controller for heating and cooling zones, with USB port (for optional Oven Manager Sofware) Speed and temperature profiling controlled via TFT touchscreen or by optional PC
Heating system: Full convection circulated hot air from top and bottom, 4 heatings on top and 1 at the bottom, 1 cooldown zone with 3 cooling ventilators at the end of the process chamber.
Exhaust:The oven uses external exhaust with a required airflow of 1150 m³/h.
Cooling: Radial ventilator at the bottom.
Heating power: Standard : 17.5 kW (approx. 6 kW after warm-up)
with RO-5030 : 19.3 kW (approx. 6 kW after warm-up)
Software License available under art.nr: SWRO-0340
User Interface: Standard interface via TFT-display with touchscreen on the oven
optional: PC with Oven Manager software
Tunnel length: 1700 mm heated tunnel, 2200 mm proces chamber
Power: 3 phase 380 / 420 Volt
Weight: 610-660 Kg (without/with bottom heating)
Voor meer informatie, neem contact met ons op.
| Specificatie | Omschrijving |
|---|---|
| Disclaimer | 0 |
