Speedline MPM AccuFlex
Voor meer informatie omtrent voorraad en prijzen, klik hier.
Speedline MPM AccuFlex in zeer goede conditie.
Bouwjaar 2006.
The AccuFlex delivers all the features required for moderate volume / high mix printing, at a cost effective price.
• 6 sigma accuracy ensures precise and repeatable printing capability
• Large board capacity maximizes product flexibility: up to 584 x 508 mm (23 x 20 in.)
• Automated product changeover capability increases production line uptime
• Microsoft Windows 2000® operating system provides easy and intuitive user programming, and effective data management
Specificaties:
BOARD HANDLING
Maximum Board Size (X x Y) 584mm x 508mm (23" x 20")
Minimum Board Size (X x Y) 75mm x 50mm (3" x 2")
Board Thickness 0.8mm to 5.0mm including warpage (0.03" to 0.20" ) 0.2mm - 3.8mm (0.008" to 0.15") - Optional
Maximum Board Weight 4.5kg (10 lbs.)
Minimum Board Edge Clearance 5mm (0.19") 3mm (0.12") - Optional
Maximum Underside Clearance 15mm (0.59")
Transport Speed Adjustable Transport Height From Floor 860mm - 960mm (34" - 38")
Transport Track Feed Direction Left-to-Right, Right-to-Left, Left-to-Left and Right-to-Right
Triple Track Conveyor Lengths 1320mm (52"), 1524mm (60"), 1727mm (68")
Method of Board Hold-Down Positive edge-clamps (front and rear)
Method of Board Support Independent, moveable magnetic support pins
PRINT PARAMETERS
Maximum Print Area (X x Y) 559mm x 498mm (22" x 19.6")
Snap-off Speed 0.2mm - 10mm/sec (0.008" - 0.39"/sec)
Print Speed 5mm - 200mm/sec (0.2" - 7.87"/sec)
Print Pressure Up to 20 kg (44 lbs)
Print Stroke 508mm (20")
Stencil Frame Size 737mm x 737mm (29" x 29") standard
Smaller Frame Accommodations By use of optional Adapters
VISION
Vision Field-of-View (FOV) 10mm x 10mm (0.40" x 0.40")
Fiducial Types Standard shape fiducials. See SMEMA standards.
Camera System Single roving camera module with dual beam optics
PERFORMANCE
Vision Alignment Repeatability: +/- 0.025mm (+/-0.001") at 6 sigma (Cp greater than or equal to 2.0*)
Vision Alignment Accuracy: +/-0.025mm (+/- 0.001” ) at 6 sigma (Cp greater than or equal to 2.0*)
Print Deposit Repeatability and Accuracy: +/- 0.050mm (+/- 0.002”) at 6 sigma (Cp greater than or equal to 2.0*)
(The higher the Cp, the lower the variability with respect to the process specification limits. In a process qualified as a 6 Sigma process
(i.e., one that allows plus or minus 6 standard deviations within the specification limits), the Cp is greater than or equal to 2.0)
Cycle Time
Standard Performance: 16.2 seconds***
Speed Enhancement Package: 12.5 seconds***
Speed Enhancement Package and Triple Track Conveyor System: 11.0 seconds***
*** Excludes process parameters such as print stroke. Determined by using 254mm (10.0”) x 203mm (8.0”) PCB with fiducials located in opposite diagonal corners.
FACILITIES
Power Requirements 110 - 240V, 50/60Hz (+/-10%)
Air Supply Requirements **** 5 CFM at 90 psi, Clean Air Supply
Height 1575 mm (62")
Depth 1448 mm(57")
Width - Standard Performance 1314 mm (51.7")
Width - High Performance 1320 mm (52"), 1524 mm (60") 1727 mm (68")
**** Optional vacuum wiper requires 21 CFM (during the vacuum stroke only).
Voor meer informatie, neem contact met ons op.
| Specificatie | Omschrijving |
|---|---|
| Disclaimer | 0 |
