Essemtec RO400FC Reflow Oven
Voor meer informatie omtrent voorraad en prijzen, klik hier.
Essemtec RO400FC Reflow Oven in goede conditie.
Specificaties:
Specifications |
| RO400FC |
Control |
|
|
| Type | Microprocessor |
| Languages | English, German, French |
| Temperatures selectable | °C, °F |
| Program capacity | 49 (10xpreset standard, 10x preset leadfree, 10xpreset curing, 19xfree) |
| Board counter | optional with sensor or standard with SMEMA option |
| Gas temperature adjustment | Adjustable from 20° to 290°C ( 68° to 554°F) for each zone |
Substrate dimensions |
|
|
| Max Reflow width | 400 mm |
| Max Substrate width | 10-400 mm |
| Max substrate width without middle rail support | 400 mm |
Conveyor |
|
|
| Transport direction | Left to Right |
| Conveyor speed range | 100-800 mm / min see slow speed option for slower speed |
| Conveyor speed repeatability | +/- 2 mm / min |
| Conveyor motor type | 24V DC with Encoder |
| In feed length | 300 mm |
| Out feed length | 200 mm |
| Entrance height (max) | 30 mm |
| Free space below substrate | 0 |
Process Dimensions |
|
|
| Heated length | 1620 mm |
| Length of Heating zone | 400 mm |
| Length of active cooling zone | 250 mm |
| Overall length cooling zone | 450 mm |
Process data |
|
|
| Total air circulation heating zones | 2'575 m³/h (1'515 cfm) |
| Air circulation per heating zone | 515 m³/h (303 cfm |
| Air circulation peak zone | 1'030 m³/h (606 cfm) |
| Air circulation cooling zone | 300 m³/h (177 cfm) |
Machine Dimensions |
|
|
| Footprint | 2'800x914mm (110.2x36") |
| Machine height | 1'350 mm (53.2") |
| Weight | 660 kg (1455 lb) |
Supplies |
|
|
| Electrical | EU: 3x400 VAC, 50Hz, 25 A, circuit breaker not required US: 3x480/277/249/209 VAC, 60Hz, 25 A (with transformer), 3 phase circuit breaker required in front of transformer |
| Power Consumption | 5.8 kW continuous, 11.6 kW (during initial heat up,15 min) |
| Minimum exhaust volume | 2x150 m3 /h = 300 m3 /h (2x88 cfm=176 cfm) |
| Recommended exhaust volume | 2x250 m3 /h = 500 m3 /h (2x150 cfm=300 cfm), option RO400FC-VNT recommended. |
| Filter / air cleaning system | No / must be added in the exhausting system |
| Exhaust specifications | 1 each at entry and exit, distance 2.075 meter (81.69”), diameter 150mm (5.9”), length 50 mm (1.97"), gas temperature at exhaust <45°C (<113F) |
Enviorment | Noise level | 70 dB (A) maximum |
Features | Emergency stop buttons | 2 (on left and right side of the machine) |
| Main power disconnect | 1 with undervoltage circuit breaker |
| Overheat security | Overheat temperature control for each zone (permanent breaker) |
| Safety standards | CE, EN 954-1 Class 3 |
| Color | White (RAL9002) silky lustre, fine structure |
Temperature profile | Preheat 1 | Preheat 2 | Preheat 3 | Preheat 4 | Cooling |
Type | Convection | Convection | Convection | Convection | Convection |
Max. Gas temp setting | 290°C (554°F) | 290°C (554°F) | 290°C (554°F) | 290°C (554°F) | N/A |
Heating power | 3000W | 3000W | 3000W | 2x3000W |
|
Regulation (reflow conditions) | +/- 3°C | +/- 3°C | +/- 3°C | +/- 3°C |
|
Ramp times (FR4 inboard measurements) | 1.8-2°C /sec | 1.8-2°C /sec | 1.8-2°C /sec | 2-3°C /sec | 2.5-3°C /sec |
Temperature mesurement | Temperature measurement directly within air stream on PCB height |
| |||
Heating up time from 20 c to set temp 160-160-160-235°C (typical used profile) | 9 min | 7 min | 7 min | 18 min |
|
ΔT within 400 mm conveyor width | <4°C | <4°C | <4°C | <4°C |
|
Cold start warm up to 235°C | 21 min | 15 min | 15 min | 18 min |
|
Cold start warm up to 290°C | 35 min | 26 min | 26 min | 30 min |
|
Max temp difference between two adjacent zones | 270°C | 80°C | 80°C | 80°C | 260°C |
Blower RPM | 2600 | 2600 | 2600 | 2600 | 2600 |
Voor meer informatie, neem contact met ons op.
| Specificatie | Omschrijving |
|---|---|
| Disclaimer | 0 |
